Compliance and Quality
DMC® is committed to satisfying customer, and other requirements, as applicable, while delivering our products on time, and continually improving the Quality Management System to provide world class tooling solutions for the aerospace, military, transportation, and electronics industry.
ISO9001: 2015/ AS9100D
Daniels Manufacturing Corporation is in conformance with the ISO9001:2015/AS9100D.
Daniels Manufacturing Corporation (DMC) does NOT use any “Conflict Minerals” in the manufacture of our products. Conflict Minerals
Equipment containing mercury or mercury compounds have not been used for fabrication, packaging, examination or test of parts, assemblies or materials supplied.
FAR 52.204-25:Daniels Manufacturing Corporation does not and will not use/rely on/supply prohibited telecommunications and video surveillance services or equipment.
FAR 52.222-21: Daniels Manufacturing Corporation does not and will not maintain or provide segregated facilities for its employees.
FAR 52.222-25: Daniels Manufacturing Corporation has developed and has on file Affirmative Action Programs.
FAR 52.222-22 / FAR 52.222-26: Daniels Manufacturing Corporation has participated and has filed the necessary requirements subject to the Equal Opportunity Clause.
FAR 52.219-1:Daniels Manufacturing Corporation:
- Is a small business concern
- Is not a small disadvantaged concern
- Is not a woman owned small business concern
- Is a veteran owned small business concern
- Is not a service-disabled veteran owned small business concern
- Is not listed as a Hub-Zone small business concern.
FAR 52.209-5: Daniels Manufacturing Corporation is not presently debarred, suspended, proposed for debarment, or declared ineligible for award under Federal contracts.
FAR 52.222-50 Combating Trafficking in Persons: Daniels Manufacturing Corporation is compliant in accordance with this reference.
DFARS 252.225-7008 and 225.225-7009: Daniels Manufacturing Corporation is compliant in accordance with this reference.
Eu RoHS Compliance
Daniels Manufacturing Corporation (DMC) manufactures hand and power assist tools, installing and removal tools, backshell adapters and accessories, Safe-T-Cable products and Alphatron tensile tester, all of which comply with European Union RoHS. Eu RoHS Compliance
Daniels Manufacturing Corporation (DMC) confirms that none of the 201 Substances of Very High Concern (SVHC) on the Reach Candidates List are used in the manufacturing, fabrication or packaging of any of our products. Reach Compliance
Certificate of Conformance
Daniels Manufacturing Corporation certifies that documentary evidence in the form of test reports for raw material and inspection records for all manufacturing processes indicating conformance to applicable specifications are on file and available for review, by appointment, at its home office.
The parts so submitted meet dimensional, functional and quality requirements as covered by the applicable purchase order, part number and/or specifications.DMC also certifies its compliance with DFARS 252.225.7014 plus Alternate I. A standard Certificate of Conformance is printed on the back of invoices and packing lists. There will be an additional charge for additional and/or non-standard Certificates of Conformance.
Certificate of Calibration/Inspection
Calibration of Daniels Manufacturing Corporation's inspection measuring and test equipment is in accordance with ANSI/NCSL Z540-1-1994. The quality system meets ISO9001:2015/AS9100 Rev. D. The accuracy of inspection gaging equipment and measuring standards used in the calibration and/or testing is traceable to the National Institute of Standards & Technology (NIST).
Daniels Manufacturing Corporation operates under a government approved (DCASR-ATL-OQOA) single standard quality control system. A documented recall system is in place to address any M&TE or measurement standard found to be significantly out-of-tolerance.
Unless otherwise specified in the contract requirements, the collective uncertainty of the measurement standards shall not exceed 25 percent of the acceptable tolerance for the characteristic being calibrated. Environmental controls have been applied to the extent necessary to assure continued measurements of required accuracy, giving due consideration to temperature (73 +/- 4 degrees), humidity (45% +/- 10%), cleanliness and other controllable factors. Compensating corrections shall be applied to calibration results in an environment which departs from acceptable conditions.
All supporting records and reports are available for review, by appointment, at our manufacturing facilities.
California Proposition 65 (1986)
Daniels Manufacturing Corporation (DMC) manufactures hand and power assisted tools, installing and removal tools, BETA adapters and accessories, Safe-T-Cable products, Twist-Strip wire preparation tools, and Alphatron tensile testers, all of which comply with California Proposition 65 (1986).
GIDEP (Government Industry Data Exchange Program) is a government run data exchange program comprised of members from both government and commercial organizations. The GIDEP Safe-Alert program provides a means of reporting “suspect counterfeit” parts and components. This cooperative activity between government and industry participants seeks to reduce or eliminate expenditures of resources by sharing technical information. Since 1959, over $2.1 BILLION in prevention of unplanned expenditures has been reported.
On August 7, 2017, Daniels Manufacturing Corporation initiated a GIDEP Safe-Alert on several companies that supply copies of DMC’s Mil-Spec M22520 crimp tools. JRready, Iwiss, and Precise Tool were identified to be manufacturing and distributing non-qualified Mil-Spec M22520 tools. These tools could cause catostrophic damage as they do not meet the standards of M22520.
Customers with these tools should alert Kevin Rickard, email@example.com, or Steven Fagan firstname.lastname@example.org at NAVAIR the Qualifying Activity (QA) for M22520 and Daniels Manufacturing Corporation.