LaceLok® Installation Tool


Your Price

Will Ship Within: Consult Factory


Register/Login for purchase options

LaceLok combines the ease of cable ties with the abrasion and chemical resistance of lacing tape. The LaceLok system consists of the installation tool and cable lacing fasteners which are constructed with the same Nomex® lacing tape used in hand-tied lace. The Nomex lace is attached by aramid fiber thread to an ultra-high temperature thermoplastic fastener head.


LaceLok can withstand extreme temperatures from -76°F to 500°F and is resistant to hydraulic fluid, jet fuel, lubricating oil, and isopropyl alcohol. It is offered in a variety of lengths from 6” to 24” long and can be wrapped once, twice, or three times around wire bundles to provide tensile strengths of 55 lbs to 165 lbs.


Using LaceLok is simple and ergonomic. The user wraps LaceLok around the bundle, feeds the end of lace through the fastener head and back under the locking pin. The end of the lace is then side-loaded into the installation tool. The user positions the fastener head in the nose of the tool and squeezes the trigger 2-3 times to tighten, lock, and terminate the fastener. The resulting loop force is controlled by the fastener, not the user. 



  • Single Wrap = 55lbs (244N) Minimum Tensile Strength

  • Double Wrap = 110lbs (489N) Minimum Tensile Strength

  • Triple Wrap = 165lbs (733N) Minimum Tensile Strength


Specifications & Approvals*:

  • MIL-DTL-32554

  • MIL-DTL-32555

  • NAVAIR 01-1A-505-1

  • AS50881

  • MIL-HDBK-522

*QPL Status Pending

Shipping Weight1.0 LBS

Limited Warranty / Limitation of Liability*

Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.

This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.



Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.


To obtain an RMA, please contact our Sales Department at 407-855-6161 or

Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.


Return material will be subject to a re-stocking charge up to twenty percent (20%). 


RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.


Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.